INSPECT SHIFT SOLENOID VALVE SL1

INSPECT SHIFT SOLENOID VALVE S1

INSPECT SHIFT SOLENOID VALVE S2

INSPECT SHIFT SOLENOID VALVE S3

INSPECT SHIFT SOLENOID VALVE S4

INSPECT SHIFT SOLENOID VALVE SL2

INSPECT SHIFT SOLENOID VALVE SR

INSPECT SHIFT SOLENOID VALVE SLT

INSPECT SHIFT SOLENOID VALVE SLU

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  1 - 2	20°C (68°F)	5.0 to 5.6 Ω

Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

• OK:

• Measurement Condition	Specified Condition
  Battery positive (+) with a 21 W bulb → Shift solenoid valve Terminal 1 Battery negative (-) → Terminal 2	Valve moves and makes an operating noise

If the result is not as specified, replace the solenoid valve.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  Shift solenoid valve S1 connector terminal - Shift solenoid valve S1 body	20°C (68°F)	11 to 15 Ω

Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

• OK:

• Measurement Condition	Specified Condition
  Battery positive (+) → Shift solenoid valve S1 connector Battery negative (-) → Shift solenoid valve S1 body	Valve moves and makes an operating noise

If the result is not as specified, replace the solenoid valve.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  Shift solenoid valve S2 connector terminal - Shift solenoid valve S2 body	20°C (68°F)	11 to 15 Ω

Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

• OK:

• Measurement Condition	Specified Condition
  Battery positive (+) → Shift solenoid valve S2 connector Battery negative (-) → Shift solenoid valve S2 body	Valve moves and makes an operating noise

If the result is not as specified, replace the solenoid valve.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  Shift solenoid valve S3 connector terminal - Shift solenoid valve S3 body	20°C (68°F)	11 to 15 Ω

Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

• OK:

• Measurement Condition	Specified Condition
  Battery positive (+) → Shift solenoid valve S3 connector Battery negative (-) → Shift solenoid valve S3 body	Valve moves and makes an operating noise

If the result is not as specified, replace the solenoid valve.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  Shift solenoid valve S4 connector terminal - Shift solenoid valve S4 body	20°C (68°F)	11 to 15 Ω

Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

• OK:

• Measurement Condition	Specified Condition
  Battery positive (+) → Shift solenoid valve S4 connector Battery negative (-) → Shift solenoid valve S4 body	Valve moves and makes an operating noise

If the result is not as specified, replace the solenoid valve.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  1 - 2	20°C (68°F)	5.0 to 5.6 Ω

Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

• OK:

• Measurement Condition	Specified Condition
  Battery positive (+) with a 21 W bulb → Shift solenoid valve Terminal 1 Battery negative (-) → Terminal 2	Valve moves and makes an operating noise

If the result is not as specified, replace the solenoid valve.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  Shift solenoid valve SR connector terminal - Shift solenoid valve SR body	20°C (68°F)	11 to 15 Ω

Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

• OK:

• Measurement Condition	Specified Condition
  Battery positive (+) → Shift solenoid valve SR connector Battery negative (-) → Shift solenoid valve SR body	Valve moves and makes an operating noise

If the result is not as specified, replace the solenoid valve.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  1 - 2	20°C (68°F)	5.0 to 5.6 Ω

Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

• OK:

• Measurement Condition	Specified Condition
  Battery positive (+) with a 21 W bulb → Shift solenoid valve Terminal 2 Battery negative (-) → Terminal 1	Valve moves and makes an operating noise

If the result is not as specified, replace the solenoid valve.

Measure the resistance according to the value(s) in the table below.

• Standard Resistance:

• Tester Connection	Condition	Specified Condition
  1 - 2	20°C (68°F)	5.0 to 5.6 Ω

Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

• OK:

• Measurement Condition	Specified Condition
  Battery positive (+) with a 21 W bulb → Shift solenoid valve Terminal 2 Battery negative (-) → Terminal 1	Valve moves and makes an operating noise

If the result is not as specified, replace the solenoid valve.