DRAIN TRANSFER OIL

ADD TRANSFER OIL

except 1GR-FE:

Remove the 2 bolts and transfer dynamic damper.

Remove the 4 bolts and transfer heat insulator.

Remove the 7 bolts and lower transfer case protector.

Remove the filler plug and gasket.

Remove the drain plug and gasket, and drain the transfer oil.

Install a new gasket onto the drain plug and then install the plug.

• Torque:
• 37 N*m{ 377 kgf*cm, 27 ft.*lbf}

Add oil so that the oil level is between 0 to 5.0 mm (0 to 0.197 in.) from the bottom lip of the filler plug hole.

• NOTICE:

Wait approximately 5 minutes and check that the oil level has not changed.

Install a new gasket onto the filler plug and then install the plug.

• Torque:
• 37 N*m{ 377 kgf*cm, 27 ft.*lbf}

Install the lower transfer case protector with the 7 bolts.

• Torque:
• 14 N*m{ 139 kgf*cm, 10 ft.*lbf}

Install the transfer heat insulator with the 4 bolts.

• Torque:
• 30 N*m{ 306 kgf*cm, 22 ft.*lbf}

except 1GR-FE:

Install the transfer dynamic damper with the 2 bolts.

• Torque:
• 12 N*m{ 122 kgf*cm, 9 ft.*lbf}