Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AB60F AUTOMATIC TRANSMISSION / TRANSAXLE
SPEED SENSOR - REMOVAL
| 1. REMOVE FRONT EXHAUST PIPE ASSEMBLY (w/ DPF) |
Disconnect the air fuel ratio sensor connector.
Disconnect the 2 air hoses.
Disconnect the exhaust gas temperature sensor connector and detach the clamp.
Remove the 2 bolts and 2 compression springs and disconnect the front exhaust pipe assembly from the center exhaust pipe assembly.
Remove the 3 nuts and front exhaust pipe.
Remove the 2 gaskets from the front exhaust pipe assembly.
| 2. REMOVE SPEED SENSOR NT |
Disconnect the sensor connector.
Remove the bolt and sensor.
Remove the O-ring from the sensor.
| 3. REMOVE SPEED SENSOR SP2 |
Disconnect the sensor connector.
Remove the bolt and sensor.
Remove the O-ring from the sensor.