INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

INSTALL FRONT CONSOLE BOX (w/o Cool Box)

REMOVE FRONT CONSOLE BOX (w/ Cool Box)

Install the floor shift with the 4 bolts. Tighten the bolts in the order shown in the illustration.

• Torque:
• 14 N*m{ 143 kgf*cm, 10 ft.*lbf}

Connect the 2 connectors.

Turn the control shaft lever RH of the park/neutral position switch counterclockwise until it stops, and then turn it clockwise 2 notches to set it to the N position.

Move the shift lever to N.

Temporarily install the floor shift gear shifting rod with the nut.

Tighten the nut while lightly pushing the lever rearward.

• Torque:
• 13 N*m{ 130 kgf*cm, 9 ft.*lbf}