Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AXLE AND DIFFERENTIAL
REAR DIFFERENTIAL CARRIER ASSEMBLY (for Standard) - INSTALLATION
| 1. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY |
Install a new gasket.
Install the differential carrier with the 10 washers and 10 nuts.
- Torque:
- 72 N*m{ 734 kgf*cm, 53 ft.*lbf}
| 2. CONNECT PROPELLER SHAFT ASSEMBLY |
Align the matchmarks on the propeller shaft flange and differential flange.
| *1 | Bolt |
| *2 | Washer |
| *a | Matchmark |
Connect the propeller shaft with the 4 bolts, 4 washers and 4 nuts.
- Torque:
- 88 N*m{ 900 kgf*cm, 65 ft.*lbf}
| 3. INSTALL REAR AXLE SHAFT |
Install the axle shaft ().
| 4. ADD DIFFERENTIAL OIL |
Add differential oil so that the oil level is between 0 to 5 mm (0 to 0.197 in.) from the bottom lip of the differential filler plug hole.
- NOTICE:
Too much or too little oil will lead to differential problems.
After changing the oil, drive the vehicle and then check the oil level again.
- Front differential oil type and viscosity:
- Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent
- Rear Differential Oil Type and Viscosity:
Item Oil Type and Viscosity w/o LSD Toyota Genuine Differential gear oil LT 75W-85 GL-5 or equivalent w/ LSD Toyota Genuine Differential gear oil LX 75W-85 GL-5 or equivalent
- Front differential capacity:
- 1.85 to 1.95 liters (1.96 to 2.06 US qts., 1.63 to 1.71 Imp. qts.)
- Rear Differential Capacity:
Item Specified Condition Standard 4.15 to 4.25 liters (4.39 to 4.49 US qts., 3.66 to 3.74 Imp. qts.) w/ LSD 4.10 to 4.20 liters (4.34 to 4.43 US qts., 3.60 to 3.69 Imp. qts.) w/ Differential lock
for Front Differential:
Using a 10 mm hexagon wrench, install a new gasket and the filler plug.
- Torque:
- 39 N*m{ 400 kgf*cm, 29 ft.*lbf}
Install the engine under cover.
for Rear Differential:
Install a new gasket and the filler plug.
- Torque:
- 49 N*m{ 500 kgf*cm, 36 ft.*lbf}