Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AXLE AND DIFFERENTIAL
REAR AXLE SHAFT - REASSEMBLY
- NOTICE:
- Do not allow foreign matter, etc. to contact the rear axle hub and bearing assembly.
| 1. INSTALL BRAKE DRUM OIL DEFLECTOR |
Install a new deflector gasket and the deflector to the rear axle shaft.
- HINT:
- Align the 2 oil drain holes.
Temporarily install a washer and nut to 5 new hub bolts as shown in the illustration.
Install the hub bolts by tightening each nut.
Remove the washer and nut from each hub bolt.
| 2. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY LH |
Position the parking brake plate on a new rear axle hub and bearing.
- NOTICE:
- Make sure to securely fit the parking brake plate to the bearing.
Using 2 socket wrenches and a press, press in the 4 housing bolts.
| 3. INSTALL REAR AXLE SHAFT LH |
Install the washer and a new retainer to the axle hub as shown in the illustration.
- NOTICE:
Install the washer with its tapered surface facing downward.
Install the retainer with its chamfered surface facing downward.
Using SST and a press, press in the rear axle shaft.
- SST
- 09631-12090
09726-40010
09951-01100
- NOTICE:
- Make sure to securely fit the bearing to the rear axle shaft.
| 4. INSTALL REAR AXLE SHAFT SNAP RING LH |
Using a snap ring expander, install a new snap ring.