Vehicle Stability Control System - Multi-Terrain Select Indicator Light Does Not Come On
DESCRIPTION
INSPECTION PROCEDURE
CHECK CAN COMMUNICATION LINE
CHECK DTC (CAN COMMUNICATION SYSTEM)
VEHICLE STABILITY CONTROL SYSTEM - Multi-terrain Select Indicator Light does not Come ON
DESCRIPTION
When the transfer gear position is L4, the multi-terrain select indicator light illuminates and control begins.
Under any of the following conditions, the multi-terrain select system does not begin control and the multi-terrain select indicator light does not illuminate.
The vehicle is in the VSC/TRC OFF state.
Crawl Control is operating.
There is a malfunction in the VSC system.
INSPECTION PROCEDURE
| 1.CHECK CAN COMMUNICATION LINE
|
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON and the GTS on.
Select "CAN Bus Check" from the System Selection Menu screen, and follow the prompts on the screen to inspect the CAN Bus.
- OK:
- "CAN Bus Check" indicates no malfunctions in CAN communication.
Result| Result | Proceed to |
| OK | A |
| NG (for LHD) | B |
| NG (for RHD) | C |
| | GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) ()
|
|
|
| | GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) ()
|
|
|
| 2.CHECK DTC (CAN COMMUNICATION SYSTEM)
|
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON and the GTS on.
Check for DTCs (for LHD: , for RHD: ).
Result| Result | Proceed to |
| CAN system DTC is not output | A |
| CAN system DTC is output (for LHD) | B |
| CAN system DTC is output (for RHD) | C |
| | GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) ()
|
|
|
| | GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) ()
|
|
|
| A | |
| |
| GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING) ()
|
|