Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
CHECK HARNESS AND CONNECTOR (TELEVISION DISPLAY ASSEMBLY - HEADPHONE TERMINAL)
REAR SEAT ENTERTAINMENT SYSTEM - Sound Signal Circuit between Headphone Terminal and Television Display
DESCRIPTION
This is the sound signal circuit from the television display assembly to the headphone terminal.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.CHECK HARNESS AND CONNECTOR (TELEVISION DISPLAY ASSEMBLY - HEADPHONE TERMINAL) |
Disconnect the L53 television display assembly connector.
Disconnect the P1 headphone terminal (video terminal) connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition L53-7 (HP2R) - P1-1 (HP2R) Always Below 1 Ω L53-5 (HP2L) - P1-2 (HP2L) Always Below 1 Ω L53-6 (SLD6) - P1-3 (SGN2) Always Below 1 Ω L53-10 (HP1R) - P1-9 (HP1R) Always Below 1 Ω L53-8 (HP1L) - P1-10 (HP1L) Always Below 1 Ω L53-9 (SLD5) - P1-11 (SGN1) Always Below 1 Ω L53-7 (HP2R) - Body ground Always 10 kΩ or higher L53-5 (HP2L) - Body ground Always 10 kΩ or higher L53-6 (SLD6) - Body ground Always 10 kΩ or higher L53-10 (HP1R) - Body ground Always 10 kΩ or higher L53-8 (HP1L) - Body ground Always 10 kΩ or higher L53-9 (SLD5) - Body ground Always 10 kΩ or higher
|
| ||||
| OK | ||
| ||