Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - NAVIGATION / MULTI INFO DISPLAY
HARD DISK DRIVE - REMOVAL
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work ().
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().
| 3. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET |
()
| 4. REMOVE NO. 2 RADIO BRACKET |
Remove the 3 bolts and No. 2 radio bracket.
| 5. REMOVE HARD DISC |
Remove the 2 screws.
Move the cover in the direction of the arrow shown in the illustration to remove it.
Remove the hard disc in the direction of the arrow shown in the illustration.