Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
FRONT DOOR SPEAKER - INSTALLATION
- HINT:
Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
| 1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY |
Connect the speaker connector.
Install the speaker with the 4 screws.
- NOTICE:
- Do not touch the cone part of the speaker.
| 2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH |
Connect the connector.
Connect the front door lock remote control cable assembly LH and front door inside locking cable assembly LH to the front door inside handle sub-assembly LH.
Attach the 4 claws and 13 clips to install the front door trim board sub-assembly LH.
Install the 3 screws.
| 3. INSTALL DOOR ASSIST GRIP COVER LH |
Attach the 8 claws to install the door assist grip cover LH to the front door trim board sub-assembly LH.
| 4. INSTALL FRONT DOOR ARMREST BASE PANEL ASSEMBLY LH |
Connect the connector.
Attach the 5 claws to install the armrest base panel.
| 5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH |
Attach the 4 claws to install the front door inside handle bezel LH.
| 6. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH |
Attach the clip and claw, and install the front door lower frame bracket garnish LH.
| 7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected ().