Dtc Cb-10 System Microcomputer Malfunction

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO

DESCRIPTION

INSPECTION PROCEDURE

REPLACE USB DEVICE OR "iPod"

CLEAR DTC

RECHECK FOR DTC

DTC CB-10 System Microcomputer Malfunction

DTC CB-11 Media Interface Microcomputer Malfunction

DTC CB-12 CD-LSI Malfunction

DESCRIPTION

DTC No.DTC Detection ConditionTrouble Area
CB-10System microcomputer malfunction
Multi-media interface ECU
USB device or "iPod"
CB-11Media interface microcomputer malfunction
CB-12CD-LSI (large scale integration) malfunction

INSPECTION PROCEDURE

  • HINT:
  • After the inspection is completed, clear the DTCs.
1.REPLACE USB DEVICE OR "iPod"

Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.

Turn the engine switch off.

  • HINT:
  • When one of these DTCs has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.

Turn the engine switch on (ACC).

Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.

NEXT
2.CLEAR DTC

Clear the DTCs ().

NEXT
3.RECHECK FOR DTC

Recheck for DTCs and check if the same DTC occurs again.

  • HINT:
  • If DTCs are detected frequently, replace the multi-media interface ECU.
  • OK:
  • Malfunction disappears.
NG
REPLACE MULTI-MEDIA INTERFACE ECU ()
OK
USB DEVICE OR "iPod" WAS DEFECTIVE