Dtc B1575 Gvif Disconnected (From Emv/Mm Integrated Device To Multi Display)

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO

DESCRIPTION

INSPECTION PROCEDURE

CLEAR DTC

CHECK DTC

REPLACE HARNESS AND CONNECTOR (GVIF CABLE)

CLEAR DTC

CHECK DTC

DTC B1575 GVIF Disconnected (from EMV/MM Integrated Device to Multi Display)

DESCRIPTION

DTC CodeDTC Detection ConditionTrouble Area
B1575GVIF disconnected (from Multi-media module receiver assembly to multi-display assembly).
Harness and connector (GVIF cable)
Multi-media module receiver assembly

INSPECTION PROCEDURE

1.CLEAR DTC

Clear the DTCs ().

NEXT
2.CHECK DTC

Recheck for DTCs and check if the same DTC is output again ().

  • OK:
  • No DTCs are output.
NG
Go to step 3
OK
USE SIMULATION METHOD TO CHECK ()
3.REPLACE HARNESS AND CONNECTOR (GVIF CABLE)

Replace the harness and connector (GVIF cable) with a new or normally functioning one.

NEXT
4.CLEAR DTC

Clear the DTCs ().

NEXT
5.CHECK DTC

Recheck for DTCs and check if the same DTC is output again ().

  • OK:
  • No DTCs are output.
NG
REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY ()
OK
END (GVIF CABLE IS DEFECTIVE)