Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
INSPECT STEREO COMPONENT AMPLIFIER ASSEMBLY
AUDIO AND VISUAL SYSTEM (w/o Navigation System) - Stereo Component Amplifier Power Source Circuit
DESCRIPTION
This circuit provides power to the stereo component amplifier assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
- NOTICE:
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
| 1.INSPECT STEREO COMPONENT AMPLIFIER ASSEMBLY |
Disconnect the F2 and F18 stereo component amplifier assembly connectors.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition F2-2 (GND) - Body ground Always Below 1 Ω F2-6 (GND2) - Body ground Always Below 1 Ω
Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection Switch Condition Specified Condition F2-3 (+B2) - F2-2 (GND) Always 11 to 14 V F18-12 (ACC) - F2-2 (GND) Engine switch on (ACC) 11 to 14 V
| *1 | Front view of wire harness connector (to Stereo Component Amplifier Assembly) |
| *2 | Front view of wire harness connector (to Stereo Component Amplifier Assembly) |
|
| ||||
| OK | ||
| ||