Audio And Visual System (W/O Navigation System) - Radio Receiver Power Source Circuit

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

INSPECT RADIO RECEIVER ASSEMBLY

AUDIO AND VISUAL SYSTEM (w/o Navigation System) - Radio Receiver Power Source Circuit

DESCRIPTION

This circuit provides power to the radio receiver assembly.


WIRING DIAGRAM

Audio And Visual System (W/O Navigation System) - Radio Receiver Power Source Circuit. AUDIO / VIDEO. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

INSPECTION PROCEDURE

  • NOTICE:
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.
1.INSPECT RADIO RECEIVER ASSEMBLY
Audio And Visual System (W/O Navigation System) - Radio Receiver Power Source Circuit. AUDIO / VIDEO. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Disconnect the F1 radio receiver assembly connector.

Measure the resistance according to the value(s) in the table below.

  • Standard Resistance:
  • Tester ConnectionConditionSpecified Condition
    F1-20 (GND) - Body groundAlwaysBelow 1 Ω

Measure the voltage according to the value(s) in the table below.

  • Standard Voltage:
  • Tester ConnectionSwitch ConditionSpecified Condition
    F1-1 (B) - F1-20 (GND)Always11 to 14 V
    F1-11 (ACC) - F1-20 (GND)Engine switch on (ACC)11 to 14 V
Text in Illustration
*1Front view of wire harness connector
(to Radio Receiver Assembly)
NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE ()