Audio And Visual System (W/ Navigation System) - Disc Cannot Be Inserted Or Is Ejected Right After Insertion
INSPECTION PROCEDURE
CHECK IF A PROPER DISC IS INSERTED
CHECK THAT DISC IS INSERTED PROPERLY
CLEAN DISC AND RECHECK
REPLACE DISC AND RECHECK
AUDIO AND VISUAL SYSTEM (w/ Navigation System) - Disc cannot be Inserted or is Ejected Right After Insertion
INSPECTION PROCEDURE
1.CHECK IF A PROPER DISC IS INSERTED |
Make sure that the disc is an audio disc or a disc with MP3 or WMA files, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.
Translucent or uniquely-shaped discs cannot be played.
CDs and DVDs with adhesive paper labels should not be played.
Commercial audio CDs and DVDs can be played.
CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.
For details on playable CDs and DVDs, refer to the Owner's Manual.
2.CHECK THAT DISC IS INSERTED PROPERLY |
Check whether or not the disc is inserted upside down.
- OK:
- Disc is properly inserted.
Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.
- OK:
- Malfunction disappears.
- Do not use a conventional record cleaner or anti-static preservative.
4.REPLACE DISC AND RECHECK |
Replace the disc with a known good one and check if the same trouble occurs again.
- OK:
- Malfunction disappears.
| REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY ()
|
|
|