Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO
CHECK HARNESS AND CONNECTOR (MULTI-DISPLAY ASSEMBLY - BATTERY AND BODY GROUND)
AUDIO AND VISUAL SYSTEM (w/ Navigation System) - Multi-display Power Source Circuit
DESCRIPTION
This circuit provides power to the multi-display assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
- NOTICE:
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
| 1.CHECK HARNESS AND CONNECTOR (MULTI-DISPLAY ASSEMBLY - BATTERY AND BODY GROUND) |
Disconnect the multi-display assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition F79-13 (GND1) - Body ground Always Below 1 Ω
Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection Condition Specified Condition F79-12 (+B2) - Body ground Always 11 to 14 V F79-23 (IG) - Body ground Engine switch on (IG) 11 to 14 V F79-24 (ACC) - Body ground Engine switch on (ACC) 11 to 14 V
| *a | Front view of wire harness connector (to Multi-display Assembly) |
|
| ||||
| OK | ||
| ||