Audio And Visual System (W/ Navigation System) - Touch Panel Switch Does Not Function

Land Cruiser URJ200 URJ202 GRJ200 VDJ200 - AUDIO / VIDEO

INSPECTION PROCEDURE

CHECK MULTI-DISPLAY ASSEMBLY

CHECK TOUCH PANEL

CHECK TOUCH SWITCH (OPERATION CHECK)

AUDIO AND VISUAL SYSTEM (w/ Navigation System) - Touch Panel Switch does not Function

INSPECTION PROCEDURE

1.CHECK MULTI-DISPLAY ASSEMBLY

Check if there is any foreign matter caught between the display and exterior frame of the multi-display assembly.

  • OK:
  • No foreign matter is caught between the display and exterior frame of the multi-display assembly.
  • HINT:
  • If there is foreign matter between the display and exterior frame of the multi-display assembly, the touch panel will remain pressed, preventing touch switch operation.
NG
REMOVE FOREIGN MATTER
OK
2.CHECK TOUCH PANEL

Check for foreign matter on the display.

  • OK:
  • The display is clean.
NG
CLEAN DISPLAY AND RECHECK TOUCH PANEL
OK
3.CHECK TOUCH SWITCH (OPERATION CHECK)
Audio And Visual System (W/ Navigation System) - Touch Panel Switch Does Not Function. AUDIO / VIDEO. Land Cruiser URJ200 URJ202 GRJ200 VDJ200

Enter the "Touch Switch Check" screen. Refer to Check Touch Switch in Operation Check ().

Touch the display in the area where the switch malfunction occurs.

  • OK:
  • A "+" mark appears at the touched position.
NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE ()
OK
REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY ()