DTC P060E Internal Control Module Throttle Position Performance
Description DTC P060E
The ECM monitors the input signals of the Throttle Position (TP) sensor No. 1 and stop light switch. As the ECM monitors the input signals of the TP sensor No. 1 and the STP signals of the stop light switch, if the input signals and control signals are deviated, a DTC is stored.
DTC Code | DTC Detection Condition | Trouble Area |
P060E | An ECM main CPU error. | ECM |
Inspection procedure
HINT:
Read freeze frame data using the intelligent tester. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air fuel ratio was lean or rich, and other data from the time the malfunction occurred.
1.CHECK DTC |
-
Clear the DTC .
-
Turn the ignition switch off.
-
Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
-
Connect the cable to the negative (-) battery terminal.
-
Turn the ignition switch to ON.
-
Check for DTC.
OK:
P060E is not output.
|
|
||||
OK | |
|