Diagnostic trouble code P060E 3UR-FE Land Cruiser

DESCRIPTION

INSPECTION PROCEDURE

CHECK DTC

DTC P060E Internal Control Module Throttle Position Performance

Description

The ECM monitors the input signals of the Throttle Position (TP) sensor No. 1 and stop light switch. As the ECM monitors the input signals of the TP sensor No. 1 and the STP signals of the stop light switch, if the input signals and control signals are deviated, a DTC is stored.

DTC Code DTC Detection Condition Trouble Area
P060E When either condition below is met:
  1. An ECM main CPU error.
  2. An ECM sub CPU error.
 ECM

Inspection procedure

1.CHECK DTC

  1. Clear DTC .

  1. Turn the engine switch off.

  1. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.

  1. Connect the cable to the negative (-) battery terminal.

  1. Turn the engine switch on (IG).

  1. Check DTC.

    OK:

    P060E is not output.

  NG  
REPLACE ECM
 
OK  
   
CHECK FOR INTERMITTENT PROBLEMS