3UR-FE Drive belt - Removal

1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

4. REMOVE V-BANK COVER SUB-ASSEMBLY

5. REMOVE FAN & GENERATOR V BELT

1. Remove the 3 bolts and screw.

2. Turn the clip indicated by the arrow in the illustration to remove the fender splash shield.

HINT:

Use the same procedures described for the LH side.

1. Remove the 10 bolts and No. 1 engine under cover.

1. Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.

   Text in Illustration

   *1	Bracket
   *2	Hook
   *3	Pin
   *4	Grommet

1. While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then insert a bar of 5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.

   Text in Illustration

   *1

   Bar

   HINT:

   The pulley bolt for the belt tensioner has a left-hand thread.

2. Remove the V belt.