3UR-FE Cylinder block - Replacement

NOTICE:

It is not necessary to remove the straight pin unless it is being replaced.

1. Remove the straight pins.

2. Using a plastic-faced hammer, tap in new straight pins to the cylinder block.

   

   Text in Illustration

   *A	Upper Side	*B	Front Side
   *C	Lower Side	*D	Rear Side

   Standard Protrusion:

   Item	Pin Diameter	Specified Condition
   Pin A	10 mm (0.394 in.)	23 mm (0.906 in.)
   Pin B	10 mm (0.394 in.)	11 mm (0.433 in.)
   Pin C	8 mm (0.315 in.)	9 mm (0.354 in.)
   Pin D	4 mm (0.157 in.)	6 mm (0.236 in.)