Вал Рычага Выбора И Переключения Передач Повторная Сборка. Corolla ZZE150

Using a pin punch (φ5 mm) and a hammer, install the inner select lever and slotted spring pin onto the shift and select lever shaft.

Drive in depth:

3.75 to 4.75 mm (0.1476 to 0.1870 in.)

Coat the shift inter lock plate and inner No. 1 shift lever with MP grease.

Using a pin punch (φ5 mm) and a hammer, install the shift inter lock plate, inner No. 1 shift lever and slotted spring pin onto the shift and select lever shaft.

Drive in depth:

-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

Coat the inner No. 2 shift lever with MP grease.

Using a pin punch (φ5 mm) and a hammer, install the inner No. 2 shift lever and slotted spring pin onto the shift and select lever shaft.

Drive in depth:

1.0 to 2.0 mm (0.0394 to 0.0787 in.)

Coat the No. 2 select spring seat with MP grease.

Install the No. 2 select spring seat and compression spring. Using a brass bar and a hammer, install a new E-ring onto the shift and select lever shaft.

Using SST and a hammer, install a new control shaft cover oil seal onto the control shaft cover.

SST

09550-60010(09951-00280)
09950-70010(09951-07150)

Drive in depth:

0.2 to 1.2 mm (0.0079 to 0.0472 in.)

Coat the control shaft cover oil seal with MP grease.

Coat the No. 1 select spring seat with MP grease.

Install the compression spring, No. 1 select spring seat, and control shaft cover assembly onto the shift and select lever shaft.

Install the dust boot onto the control shaft cover.

Install the shift lever damper with the lock pin onto the shift and select lever shaft assembly.

Install the spring washer with the nut.

Момент затяжки:

12 Н*м{120 кгс*см, 8.7 фунт-сила-футов}

Install the control shaft assembly to the selecting bellcrank support with the spring washer and nut.

Момент затяжки:

12 Н*м{122 кгс*см, 8.7 фунт-сила-футов}

Install the 2 selecting bellcrank bushings to the selecting bellcrank support as shown in the illustration.

Install the No. 2 selecting bellcrank dust cover to the selecting bellcrank support.

УКАЗАНИЕ:

Position the arrow mark direction as shown in the illustration.

Install the selecting bellcrank to the selecting bellcrank support.

Install the selecting bellcrank plate washer to the selecting bellcrank with the spring washer and nut.

Момент затяжки:

12 Н*м{122 кгс*см, 8.7 фунт-сила-футов}

Install the No. 1 selecting bellcrank dust cover to the selecting bellcrank.

Install the shifting bellcrank dust cover to the selecting bellcrank assembly.