Механическая Трансмиссия В Блоке С Главной Передачей В Сборе Установка. Corolla ZZE150

Install the rear engine mounting bracket with the 3 bolts.

Момент затяжки:

45 Н*м{459 кгс*см, 33 фунт-сила-футов}

Install the front engine mounting bracket with the 3 bolts.

Момент затяжки:

64 Н*м{653 кгс*см, 47 фунт-сила-футов}

Install the engine mounting bracket LH with the 3 bolts.

Момент затяжки:

64 Н*м{653 кгс*см, 47 фунт-сила-футов}

Install the control cable bracket with the 2 bolts.

Момент затяжки:

25 Н*м{250 кгс*см, 18 фунт-сила-футов}

Align the input shaft with the clutch disc and install the manual transaxle onto the engine.

Install the 7 bolts.

Момент затяжки:

33 Н*м{337 кгс*см, 24 фунт-сила-футов}

ПРИМЕЧАНИЕ:

1. Insert dowel pins into the dowel holes securely so that the end face of the transaxle assembly fits close against the engine assembly before tightening the bolts.
   
2. Make sure that the dowel pins are not loose, bent, damaged or scratched and then install the transaxle onto the engine with the contact surfaces of the engine and transaxle flat against each other.
   

Install the No. 1 air tube with the 3 bolts, and tighten the 2 hose clamps.

Момент затяжки:

Bolt:

20 Н*м{204 кгс*см, 15 фунт-сила-футов}

Hose clamp:

6.3 Н*м{64 кгс*см, 56 фунт-сила-дюймов}

Install the engine wire to the engine.

Install the rear engine mounting insulator with the bolt.

Момент затяжки:

95 Н*м{969 кгс*см, 70 фунт-сила-футов}

Install the front engine mounting insulator with the bolt and nut.

Момент затяжки:

145 Н*м{1480 кгс*см, 107 фунт-сила-футов}