Масляный Насос Проверка. Corolla ZZE150

Using a dial indicator, measure the inside diameter of the stator shaft bushings.

Standard inside diameter:

21.500 to 21.526 mm (0.84646 to 0.84748 in.)

Maximum inside diameter:

21.526 mm (0.84748 in.)

Install the input shaft assembly onto the stator shaft assembly and check that the input shaft assembly turns smoothly.

ПРИМЕЧАНИЕ:

Replace the stator assembly with a new one if it moves roughly or makes unusual noise.

Inspect the input shaft's contact surface with the bearing when replacing, and replace the input shaft with a new one if any damage or discoloration is found.

Measure the clearance between the tips of the driven gear teeth and the drive gear teeth.

Standard tip clearance:

0.07 to 0.15 mm (0.0028 to 0.0059 in.)

Maximum tip clearance:

0.15 mm (0.0059 in.)

Push the driven gear to one side of the body. Using a feeler gauge, measure the clearance.

Standard body clearance:

0.10 to 0.15 mm (0.0039 to 0.0059 in.)

Maximum body clearance:

0.15 mm (0.0059 in.)

Using a steel straight edge and feeler gauge, measure the side clearance of both gears.

Standard side clearance:

0.02 to 0.05 mm (0.0008 to 0.0020 in.)

Maximum side clearance:

0.05 mm (0.0020 in.)

Drive gear thickness:

No.	Thickness mm (in.)
1	9.44 to 9.45 (0.3717 to 0.3720)
2	9.45 to 9.46 (0.3720 to 0.3724)
3	9.46 to 9.47 (0.3724 to 0.3728)
4	9.47 to 9.48 (0.3728 to 0.3732)
5	9.48 to 9.49 (0.3732 to 0.3736)

Driven gear thickness:

No.	Thickness mm (in.)
1	9.44 to 9.45 (0.3717 to 0.3720)
2	9.45 to 9.46 (0.3720 to 0.3724)
3	9.46 to 9.47 (0.3724 to 0.3728)
4	9.47 to 9.48 (0.3728 to 0.3732)
5	9.48 to 9.49 (0.3732 to 0.3736)

Using a dial indicator, measure the inside diameter of the oil pump body bushing.

Standard inside diameter:

38.113 to 38.138 mm (1.50050 to 1.50149 in.)

Maximum inside diameter:

38.138 mm (1.50149 in.)