Dtc P0705 Transmission Range Sensor Circuit Malfunction (Prndl Input). Corolla ZZE150

Трансмиссия. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Автоматическая Трансмиссия U341E. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

DESCRIPTION

MONITOR DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK HARNESS AND CONNECTOR (BATTERY - PARK/NEUTRAL POSITION SWITCH)

CHECK HARNESS AND CONNECTOR (OUTPUT SIGNAL)

INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

CHECK HARNESS AND CONNECTOR (PARK/NEUTRAL POSITION SWITCH - ECM)

CHECK HARNESS AND CONNECTOR (PARK/NEUTRAL POSITION SWITCH - SHIFT LOCK CONTROL UNIT)

INSPECT SHIFT LOCK CONTROL UNIT ASSEMBLY

CHECK HARNESS AND CONNECTOR (SHIFT LOCK CONTROL UNIT ASSEMBLY - ECM)

CHECK HARNESS AND CONNECTOR (PARK/NEUTRAL POSITION SWITCH - ECM)

DTC P0705 Transmission Range Sensor Circuit Malfunction (PRNDL Input)


DESCRIPTION

The park/neutral position switch detects the shift lever position and sends signals to the ECM.

DTC No.
DTC Detection Condition
Trouble Area
P0705
(A) Any 2 or more signals of the following are ON simultaneously (2-trip detection logic)
  1. NSW (STAR) input signal is ON.
  2. R input signal is ON.
  3. D input signal is ON.
  4. 2 input signal is ON.
  5. L input signal is ON.
(B) Any 2 or more signals of the following are ON simultaneously (2-trip detection logic)
  1. P input signal is ON.
  2. R input signal is ON.
  3. N input signal is ON.
  4. D input signal is ON.
  5. 2 input signal is ON.
  6. L input signal is ON.
(C) All switches are OFF simultaneously for P, R, N, D, 2 and L positions (2-trip detection logic)
(D) Both 1 and 2 are met (2-trip detection logic)
  1. One of following is met
    1. NSW (STAR) input signal is ON.
    2. P input signal is ON.
    3. R input signal is ON.
    4. N input signal is ON.
  2. One of following is ON.
    1. 3 input signal is ON.
  1. Open or short in park/neutral position switch circuit
  2. Park/neutral position switch
  3. ECM

MONITOR DESCRIPTION

The park/neutral position switch detects the gearshift position and sends a signal to the ECM.
For security, the park/neutral position switch detects the gearshift position so that engine can be started only when the vehicle is in P or N shift position.
When the park/neutral position switch sends more than one signal at a time from switch positions P, R, N, D, 3, 2 or L the ECM interprets this as a fault in the switch. The ECM will turn on the MIL.

WIRING DIAGRAM


COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Автоматическая Трансмиссия U341E.Система Автоматической Трансмиссии. Dtc P0705 Transmission Range Sensor Circuit Malfunction (Prndl Input)


COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Автоматическая Трансмиссия U341E.Система Автоматической Трансмиссии. Dtc P0705 Transmission Range Sensor Circuit Malfunction (Prndl Input)


INSPECTION PROCEDURE

1.CHECK HARNESS AND CONNECTOR (BATTERY - PARK/NEUTRAL POSITION SWITCH)


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Автоматическая Трансмиссия U341E.Система Автоматической Трансмиссии. Dtc P0705 Transmission Range Sensor Circuit Malfunction (Prndl Input)

  1. Disconnect the park/neutral position switch connector.

  1. Turn the ignition switch on (IG).

  1. Measure the voltage according to the value(s) in the table below.

    Standard voltage:
    Tester Connection
    		Switch Condition
    		Specified Condition
    B88-2 (RB) - Body ground
    		Ignition switch on (IG)
    		11 to 14 V


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


2.CHECK HARNESS AND CONNECTOR (OUTPUT SIGNAL)


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Автоматическая Трансмиссия U341E.Система Автоматической Трансмиссии. Dtc P0705 Transmission Range Sensor Circuit Malfunction (Prndl Input)

  1. Turn the ignition switch on (IG).

  1. Measure the voltage according to the value(s) in the table below.

    Standard voltage:
    Tester Connection
    		Switch Condition
    		Specified Condition
    B88-4 (B) - Body ground
    		Ignition switch on (IG)
    		11 to 14 V
    Result:
    Result
    		Proceed to
    OK
    		A
    NG (w/o Entry and Start System)
    		B
    NG (w/ Entry and Start System)
    		C


B
Перейдите к шагу 8

C
CHECK CRANKING HOLDING FUNCTION CIRCUIT (for 2ZR-FE) (Нажмите здесь)
A


3.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Автоматическая Трансмиссия U341E.Система Автоматической Трансмиссии. Dtc P0705 Transmission Range Sensor Circuit Malfunction (Prndl Input)

  1. Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.

    Standard resistance:
    Tester Connection
    		Shift Position
    		Specified Condition
    4 - 5
    		P and N
    		Below 1 Ω
    Except P and N
    		10 kΩ or higher
    2 - 6
    		P
    		Below 1 Ω
    Except P
    		10 kΩ or higher
    2 - 1
    		R
    		Below 1 Ω
    Except R
    		10 kΩ or higher
    2 - 9
    		N
    		Below 1 Ω
    Except N
    		10 kΩ or higher
    2 - 7
    		D and 3
    		Below 1 Ω
    Except D and 3
    		10 kΩ or higher
    2 - 3
    		2
    		Below 1 Ω
    Except 2
    		10 kΩ or higher
    2 - 8
    		L
    		Below 1 Ω
    Except L
    		10 kΩ or higher


NG
REPLACE PARK/NEUTRAL POSITION SWITCH ASSEMBLY (Нажмите здесь)
OK


4.CHECK HARNESS AND CONNECTOR (PARK/NEUTRAL POSITION SWITCH - ECM)


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Автоматическая Трансмиссия U341E.Система Автоматической Трансмиссии. Dtc P0705 Transmission Range Sensor Circuit Malfunction (Prndl Input)

  1. Connect the park/neutral position switch connector.

  1. Disconnect the ECM connectors.

  1. Turn the ignition switch on (IG), and measure the voltage according to the value(s) in the table below when the shift lever is moved to each position.

    Standard voltage:
    Tester Connection
    		Shift Position
    		Specified Condition
    B31-73 (P) - Body ground
    		P
    		11 to 14 V
    Except P
    		Below 1 V
    B31-54 (N) - Body ground
    		N
    		11 to 14 V
    Except N
    		Below 1 V
    B31-53 (R) - Body ground
    		R
    		11 to 14 V*
    Except R
    		Below 1 V
    B31-56 (D) - Body ground
    		D and 3
    		11 to 14 V
    Except D and 3
    		Below 1 V
    B31-55 (2) - Body ground
    		2
    		11 to 14 V
    Except 2
    		Below 1 V
    B31-74 (L) - Body ground
    		L
    		11 to 14 V
    Except L
    		Below 1 V
    УКАЗАНИЕ:
    *: The voltage will drop slightly due to lighting up of the back up light.


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


5.CHECK HARNESS AND CONNECTOR (PARK/NEUTRAL POSITION SWITCH - SHIFT LOCK CONTROL UNIT)


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Автоматическая Трансмиссия U341E.Система Автоматической Трансмиссии. Dtc P0705 Transmission Range Sensor Circuit Malfunction (Prndl Input)

  1. Disconnect the transmission control switch connector of shift lock control unit assembly.

  1. Turn the ignition switch on (IG), and measure the voltage according to the value(s) in the table below when the shift lever is moved to each position.

    Standard voltage:
    Tester Connection
    		Shift Position
    		Specified Condition
    1 - Body ground
    		D and 3
    		11 to 14 V
    Except D and 3
    		Below 1 V


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK


6.INSPECT SHIFT LOCK CONTROL UNIT ASSEMBLY


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Автоматическая Трансмиссия U341E.Система Автоматической Трансмиссии. Dtc P0705 Transmission Range Sensor Circuit Malfunction (Prndl Input)

  1. Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.

    Standard resistance:
    Tester Connection
    		Shift Position
    		Specified Condition
    1 - 2
    		3 and 2
    		Below 1 Ω
    Except 3 and 2
    		10 kΩ or higher
    Result:
    Result
    		Proceed to
    OK
    		A
    NG (for Hatchback)
    		B
    NG (for Sedan)
    		C


B
REPLACE SHIFT LOCK CONTROL UNIT ASSEMBLY (for Hatchback) (Нажмите здесь)

C
REPLACE SHIFT LOCK CONTROL UNIT ASSEMBLY (for Sedan) (Нажмите здесь)
A


7.CHECK HARNESS AND CONNECTOR (SHIFT LOCK CONTROL UNIT ASSEMBLY - ECM)


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Автоматическая Трансмиссия U341E.Система Автоматической Трансмиссии. Dtc P0705 Transmission Range Sensor Circuit Malfunction (Prndl Input)

  1. Connect the transmission control switch connector of shift lock control unit assembly.

  1. Turn the ignition switch on (IG), and measure the voltage according to the value(s) in the table below when the shift lever is moved to each position.

    Standard voltage:
    Tester Connection
    		Shift Position
    		Specified Condition
    A50-26 (3) - Body ground
    		3
    		11 to 14 V
    Except 3
    		Below 1 V


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

REPLACE ECM (for 2ZR-FE) (Нажмите здесь)

8.CHECK HARNESS AND CONNECTOR (PARK/NEUTRAL POSITION SWITCH - ECM)


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Автоматическая Трансмиссия U341E.Система Автоматической Трансмиссии. Dtc P0705 Transmission Range Sensor Circuit Malfunction (Prndl Input)

  1. Turn the ignition switch off.

  1. Disconnect the ECM connectors.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance (Check for open):
    Tester Connection
    		Condition
    		Specified Condition
    B88-4 (B) - B31-52 (NSW)
    		Always
    		Below 1 Ω
    Standard resistance (Check for short):
    Tester Connection
    		Condition
    		Specified Condition
    B88-4 (B) or B31-52 (NSW) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

REPLACE ECM (for 2ZR-FE) (Нажмите здесь)