Стартер Разборка. Corolla Auris

Remove the nut and disconnect the lead wire from the magnet starter switch assembly terminal.

Loosen the 2 nuts holding the magnet starter switch assembly onto the starter housing.

Pull the magnet starter switch assembly and while lifting the front part of the magnet starter switch assembly, release the plunger hook from the drive lever and magnet starter switch assembly.

Remove the 2 through bolts and pull out the commutator end frame together with the armature.

Remove the 2 screws and commutator end frame, and hold down the lead wire while releasing the commutator end frame.

ПРИМЕЧАНИЕ:

To avoid interference between the brush holder and the dust protector, pull the commutator end frame away at an angle.

Using a screwdriver, hold the spring back and disconnect the brush holder.

Disconnect the 4 brushes and remove the brush holder.

Remove the drive lever and starter clutch with shock absorber from the starter housing.

Using a screwdriver, tap in the stop collar toward the starter clutch.

Using a screwdriver, pry off the snap ring.

Remove the stop collar and starter clutch from the planetary shaft.