Стартер (Изготовление Tmc) Установка. Corolla Auris

Install the starter assembly with the 2 bolts.

Момент затяжки:

64 Н*м{653 кгс*см, 47 фунт-сила-футов}

Install the wire harness with the nut.

Момент затяжки:

9.8 Н*м{100 кгс*см, 87 фунт-сила-дюймов}

Connect the starter connector.

Install the bracket with the bolt.

Момент затяжки:

26 Н*м{260 кгс*см, 19 фунт-сила-футов}

Install the ground cables to the manual transaxle with the 2 bolts.

Момент затяжки:

8.4 Н*м{85 кгс*см, 74 фунт-сила-дюймов}

Insert the No. 4 air hose to the diesel throttle body.

Insert the No. 2 air tube to the No. 4 air hose as described below.

1. Align the embossed mark of the No. 2 air tube within the paint mark of the No. 4 air hose.
   





2. Temporarily install the 2 hose clamps.
   

   ПРИМЕЧАНИЕ:

   Each hose clamp should be installed so that the paint mark can be seen on either side of the clamp band as shown in the illustration.

Install the No. 2 air tube with the bolt.

Момент затяжки:

48 Н*м{489 кгс*см, 35 фунт-сила-футов}

Tighten the 2 hose clamps.

Момент затяжки:

6.3 Н*м{64 кгс*см, 56 фунт-сила-дюймов}

Connect the sensor connector.

Connect the 2 vacuum transmitting hoses to the No. 2 air tube.

Install the vacuum transmitting hose to the 3 clamps.

Install the battery clamp.

Момент затяжки:

for bolt:

17 Н*м{168 кгс*см, 12 фунт-сила-футов}

for nut:

3.5 Н*м{36 кгс*см, 31 фунт-сила-дюймов}

Install the 6 clips and upper radiator air deflector.

Attach the 4 clips to install the engine cover.