Масло И Масляный Фильтр Замена. Corolla Auris

Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Система Смазки 1Nd-Tv. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. DRAIN ENGINE OIL

  2. REMOVE OIL FILTER SUB-ASSEMBLY

  3. INSTALL OIL FILTER SUB-ASSEMBLY

  4. ADD ENGINE OIL

  5. INSPECT FOR OIL LEAK

Масло И Масляный Фильтр -- Замена


ПРЕДОСТЕРЕЖЕНИЕ:
  1. Prolonged and repeated contact with engine oil will cause removal of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.
  2. Precautions should be taken when replacing engine oil to minimize the risk of your skin coming into contact with used engine oil. Wear protective clothing and gloves. Wash your skin thoroughly with soap and water, or use a waterless hand cleaner to remove any used engine oil. Do not use gasoline, thinners or solvents.
  3. For environmental protection, used oil and used oil filters must be disposed of at designated disposal sites.


1. DRAIN ENGINE OIL

  1. Remove the oil filler cap.

  1. Remove the oil drain plug and drain the oil into a container.

  1. Clean and install the oil drain plug with a new gasket.

    Момент затяжки:
    38 Н*м{387 кгс*см, 28 фунт-сила-футов}


2. REMOVE OIL FILTER SUB-ASSEMBLY

  1. Open the service cover.

  1. Using SST, remove the oil filter.

    SST
    09228-07501


3. INSTALL OIL FILTER SUB-ASSEMBLY

  1. Check and clean the oil filter installation surface.

  1. Apply clean engine oil to the gasket of a new oil filter.

  1. Lightly screw the oil filter into place, then tighten it until the gasket comes into contact with the seat.

  1. Using SST, tighten the oil filter.
    Depending on the work space available, choose from the following:

    SST
    09228-07501

    1. If enough space is available, use a torque wrench to tighten the oil filter.

      Момент затяжки:
      18 Н*м{180 кгс*см, 13 фунт-сила-футов}

    2. If enough space is not available to use a torque wrench, tighten the oil filter a 3/4 turn by hand or use a common wrench.

  1. Close the service cover.



4. ADD ENGINE OIL

  1. Fill with fresh engine oil.

    Engine oil:

    Oil Grade
    		Oil Viscosity (SAE)
    1. ACEA B1
    2. API CF-4 or CF (you may also use API CE or CD.)
    1. 5W-30
    2. 10W-30
    3. 15W-40
    4. 20W-50

    Capacity:

    Item
    		Fill amount
    Drain and refill with oil filter change
    		4.3 liters (4.5 US qts, 3.8 lmp. qts)
    Drain and refill without oil filter change
    		3.8 liters (4.0 US qts, 3.3 lmp. qts)
    Dry fill
    		4.8 liters (5.1 US qts, 4.2 lmp. qts)


5. INSPECT FOR OIL LEAK