Выпускной Коллектор Снятие. Corolla Auris
Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
REMOVE ENGINE ASSEMBLY (for DPF)
REMOVE WINDSHIELD WIPER MOTOR AND LINK (for CCo)
REMOVE COWL BODY MOUNTING REINFORCEMENT LH (for CCo)
REMOVE COWL TOP PANEL OUTER (for CCo)
REMOVE NO. 1 ENGINE COVER (for CCo)
REMOVE AIR CLEANER CAP SUB-ASSEMBLY (for CCo)
REMOVE NO. 1 AIR HOSE (for CCo)
REMOVE FRONT EXHAUST PIPE ASSEMBLY (for CCo)
REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR (for CCo)
REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR (for DPF)
REMOVE NO. 2 MANIFOLD CONVERTER INSULATOR (for DPF)
REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY (for CCo)
REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY (for DPF)
REMOVE NO. 1 TURBO INSULATOR
REMOVE NO. 5 WATER BY-PASS PIPE
REMOVE TURBO OIL OUTLET PIPE
REMOVE NO. 2 TURBO OIL PIPE
REMOVE TURBOCHARGER STAY
REMOVE TURBOCHARGER SUB-ASSEMBLY
REMOVE NO. 2 WATER BY-PASS HOSE (for CCo)
REMOVE EGR COOLER ASSEMBLY (for CCo)
REMOVE EGR COOLER ASSEMBLY (for DPF)
REMOVE EXHAUST MANIFOLD
Выпускной Коллектор -- Снятие |
1. REMOVE ENGINE ASSEMBLY (for DPF) |
- УКАЗАНИЕ:
- See the steps from "REMOVE FRONT WHEELS" through "REMOVE ENGINE ASSEMBLY WITH TRANSAXLE" (See page Нажмите здесь).
2. REMOVE WINDSHIELD WIPER MOTOR AND LINK (for CCo) |
(See page Нажмите здесь).
3. REMOVE COWL BODY MOUNTING REINFORCEMENT LH (for CCo) |
Выверните 3 болта и снимите левый усилитель крепления кожуха к кузову.
4. REMOVE COWL TOP PANEL OUTER (for CCo) |
Remove the cowl top panel outer (for Sedan)
(See page Нажмите здесь).
Remove the cowl top panel outer (for Hatchback)
(See page Нажмите здесь).
5. REMOVE NO. 1 ENGINE COVER (for CCo) |
Detach the 4 clips and remove the engine cover.
6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (for CCo) |
Disconnect the mass air flow meter connector.
Disconnect the No. 2 ventilation hose.
Disconnect the 2 clamps and band, and remove the air cleaner cap sub-assembly.
Remove the air cleaner filter element.
7. REMOVE NO. 1 AIR HOSE (for CCo) |
Loosen the 2 hose clamp bolts and remove No. 1 air hose.
8. REMOVE FRONT EXHAUST PIPE ASSEMBLY (for CCo) |
Remove the 2 bolts and 2 compression springs.
Remove the 2 bolts and 2 compression springs.
Remove the exhaust pipe supports, then remove the front exhaust pipe assembly.
9. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR (for CCo) |
Remove the 4 bolts and manifold converter insulator.
10. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR (for DPF) |
Remove the 5 bolts and No. 1 manifold converter insulator.
11. REMOVE NO. 2 MANIFOLD CONVERTER INSULATOR (for DPF) |
Remove the 3 bolts and No. 2 manifold converter insulator.
12. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY (for CCo) |
Remove the bolt, nut and No. 1 manifold stay.
Remove the 3 bolts and No. 2 manifold stay.
Remove the 2 bolts, nut and No. 2 exhaust manifold stay.
Remove the 3 nuts, manifold converter and gasket.
13. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY (for DPF) |
Disconnect the 2 exhaust gas temperature sensor connectors.
Remove the bolt, nut and No. 1 manifold stay.
Remove the 3 bolts and No. 2 manifold stay.
Remove the 2 bolts, nut and No. 2 exhaust manifold stay.
Remove the 3 nuts, manifold converter sub-assembly and turbine outlet elbow gasket.
14. REMOVE NO. 1 TURBO INSULATOR |
Remove the 2 bolts and insulator.
15. REMOVE NO. 5 WATER BY-PASS PIPE |
Using needle-nose pliers, grip the claws of the clip and slide the clip to disconnect the No. 3 water by-pass hose.
- УКАЗАНИЕ:
- Place a container under the connection before disconnecting the No. 3 water by-pass hose because water in the hose may spill out.
Using needle-nose pliers, grip the claws of the clip and slide the clip to disconnect the No. 2 water by-pass hose.
- УКАЗАНИЕ:
- Place a container under the connection before disconnecting the No. 2 water by-pass hose because water in the hose may spill out.
Remove the 2 bolts and by-pass pipe.
16. REMOVE TURBO OIL OUTLET PIPE |
Remove the 4 bolts, 2 gaskets and outlet pipe.
- УКАЗАНИЕ:
- Place a container under the connection before disconnecting the outlet pipe because oil in the pipe may spill out.
17. REMOVE NO. 2 TURBO OIL PIPE |
Remove the 2 bolts, 2 gaskets and oil pipe.
18. REMOVE TURBOCHARGER STAY |
Remove the 2 nuts, 2 spacers and turbocharger stay.
19. REMOVE TURBOCHARGER SUB-ASSEMBLY |
Remove the 3 nuts, gasket and turbocharger.
20. REMOVE NO. 2 WATER BY-PASS HOSE (for CCo) |
Using pliers, grip the claws of the 2 clips and slide the 2 clips to remove the No. 2 water by-pass hose.
- УКАЗАНИЕ:
- Place a container under the connection before removing the water by-pass hose because coolant in the hose may spill out.
21. REMOVE EGR COOLER ASSEMBLY (for CCo) |
Remove the 4 bolts.
Remove the 2 bolts, 2 nuts, EGR cooler, O-ring and 2 gaskets.
22. REMOVE EGR COOLER ASSEMBLY (for DPF) |
Disconnect the vacuum hose from the No. 2 EGR valve.
Remove the 4 bolts (*1).
Remove the 2 bolts, 2 nuts, EGR cooler assembly and 2 gaskets (*2).
Remove the 2 bolts and 2 nuts.
Separate the No. 1 EGR pipe, No. 2 EGR valve assembly, EGR cooler, O-ring and 2 gaskets.
23. REMOVE EXHAUST MANIFOLD |
Remove the 8 nuts, 8 collars and exhaust manifold.
Remove the exhaust manifold gasket.