Задний Сальник Коленчатого Вала Установка. Corolla Auris

Apply MP grease to a new oil seal lip.

ПРИМЕЧАНИЕ:

Keep the lip free from foreign matter.

Using SST and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.

SST

09223-15030
09950-70010(09951-07100)

Oil seal tap in depth:

-1.0 to 0 mm (-0.0394 to 0 in.)

ПРИМЕЧАНИЕ:

Wipe off extra grease from the crankshaft.

Install the No. 1 crankshaft position sensor plate.

Hold the crankshaft with SST.

SST

09960-10010(09962-01000,09963-01000)

Using several steps, uniformly install and tighten the 6 bolts in the sequence shown in the illustration (Procedure "A").

Момент затяжки:

49 Н*м{500 кгс*см, 36 фунт-сила-футов}

Mark the bolts with paint as shown in the illustration.

Retighten the bolts 90° in the same sequence as procedure "A".

Check that the paint marks of each bolt are at a 90° angle from the original position.

Install the clutch disk assembly for C53 (See page Нажмите здесь).

Install the clutch disk assembly for C53 (See page Нажмите здесь).

Install the clutch cover assembly for C53 (See page Нажмите здесь).

Install the clutch cover assembly for C53 (See page Нажмите здесь).

Inspect and adjust clutch cover assembly for C53 (See page Нажмите здесь).

Inspect and adjust clutch cover assembly for C53A (See page Нажмите здесь).

Install the crankshaft position sensor with the bolt.

Момент затяжки:

8.0 Н*м{82 кгс*см, 71 фунт-сила-дюймов}

Connect the crankshaft position sensor connector.

Install the manual transaxle for C50 (See page Нажмите здесь).

Install the manual transaxle for C50A (See page Нажмите здесь).