Узел Топливного Бака -- Установка |
| 1. INSTALL FUEL TANK BREATHER HOSE |
Install the fuel tank breather hose to the fuel sub tank.
| 2. INSTALL FUEL TANK TO FILLER PIPE HOSE |
Install the fuel tank to filler pipe hose to the fuel sub tank.
| 3. INSTALL FUEL TANK VENT TUBE ASSEMBLY |
Install a new gasket and fuel tank vent tube with the 8 screws.
- Момент затяжки:
- 4.0 N*m{41 kgf*cm, 35 in.*lbf}
Attach the wire harness clamp.
| 4. INSTALL FUEL SUB TANK SUB-ASSEMBLY |
Set the fuel sub tank on a transmission jack and lift up the transmission jack.
Connect the 2 fuel tank bands with the 4 bolts.
- Момент затяжки:
- 40 N*m{408 kgf*cm, 30 ft.*lbf}
Connect the fuel sender gauge connector.
| 5. CONNECT FUEL TANK BREATHER HOSE |
Connect the fuel tank breather hose to the filler pipe.
| 6. CONNECT FUEL TANK TO FILLER PIPE HOSE |
Connect the fuel tank to filler pipe hose to the filler pipe.
| 7. CONNECT FUEL HOSE |
Connect the fuel evaporation hose, fuel breather hose and 2 fuel hoses.
| 8. INSTALL NO. 2 FUEL TANK PROTECTOR |
Install the No. 2 fuel tank protector with the 5 bolts.
- Момент затяжки:
- 20 N*m{204 kgf*cm, 15 ft.*lbf}
| 9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- ПРИМЕЧАНИЕ:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page Нажмите здесь).
| 10. BLEED AIR FROM FUEL SYSTEM |
Using the hand pump mounted on the fuel filter cap, bleed the air from the fuel system. Continue pumping until the pump resistance increases.
 |
| 11. INSPECT FOR FUEL LEAK |
Check that there are no fuel leaks anywhere in the fuel system after performing maintenance.
- УКАЗАНИЕ:
- When checking for fuel leaks, make sure that there is pressure in the fuel line.