Exhaust Fuel Addition Injector Installation

Install a new gasket, the exhaust fuel addition injector and nozzle holder clamp with the washer and bolt.

Момент затяжки:

29 Н*м{296 кгс*см, 21 фунт-сила-футов}

УКАЗАНИЕ:

Install the nozzle holder clamp while holding it.

Install a new gasket and the fuel tube with the union bolt.

Момент затяжки:

23 Н*м{235 кгс*см, 17 фунт-сила-футов}

Turn the retainer in the direction indicated by the arrow until the retainer stops.

Insert the fuel tube connector into the injector.

Turn the retainer in the direction indicated by the arrow until it makes a "click" sound.

ПРИМЕЧАНИЕ:

If the fuel tube connector is not inserted to the correct position in the injector, the retainer cannot be turned farther in the direction of the arrow.

Connect the exhaust fuel addition injector connector.

Install the cleaner case with the 3 bolts and connect the wire harness clamp.

Момент затяжки:

5.0 Н*м{51 кгс*см, 44 фунт-сила-дюймов}

Install the air filter element.

Using pliers, grip the claws of the clip to install the air cleaner cap.

Using pliers, grip the claws of the clip and slide the clip to connect the PCV hose.

Insert the hinge parts of the air cleaner cap into the air cleaner case, and then hang the 3 hook clamps.

Connect the mass air flow meter connector.

Attach the wire harness clamp.