Camshaft Position Sensor -- Installation |
| 1. INSTALL CAMSHAFT POSITION SENSOR |
 |
- ПРИМЕЧАНИЕ:
- Make sure that the O-ring is not cracked or jammed when installing it.
Apply a light coat of engine oil to the O-ring of the sensor.
Install the sensor with the bolt.
- Момент затяжки:
- 9.0 Н*м{90 кгс*см, 80 фунт-сила-дюймов}
 |
Connect the sensor connector.
| 2. INSTALL AIR CLEANER CAP |
Install the air cleaner filter element onto the air cleaner case.
Insert the hinge part of the air cleaner cap into the air cleaner case, then hang the 2 hook clamps.
 |
Align the matchmarks of the No. 1 air cleaner hose and throttle body, and then connect the air cleaner hose No. 1 to the throttle body and unfasten the No. 1 air cleaner hose clamp.
- ПРИМЕЧАНИЕ:
- Make sure that the hose clamp is at the correct angle.
 |
Connect the purge line hose to the clamp.
 |
Connect the No. 2 ventilation hose to the air cleaner hose.
Install the 4 wire harness clamps.
 |
Connect the mass air flow meter connector.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 4. CHECK FOR ENGINE OIL LEAKAGE |
| 5. INSTALL NO. 1 ENGINE COVER |
Install the air cleaner filter element onto the air cleaner case.
Insert the hinge part of the air cleaner cap into the air cleaner case, then hang the 2 hook clamps.
|
Align the matchmarks of the No. 1 air cleaner hose and throttle body, and then connect the air cleaner hose No. 1 to the throttle body and unfasten the No. 1 air cleaner hose clamp.
- ПРИМЕЧАНИЕ:
- Make sure that the hose clamp is at the correct angle.
|
Connect the purge line hose to the clamp.
|
Connect the No. 2 ventilation hose to the air cleaner hose.
Install the 4 wire harness clamps.
|
Connect the mass air flow meter connector.