Масло И Масляный Фильтр - Замена

Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150 - СИСТЕМА СМАЗКИ ДВИГАТЕЛЯ 5L-E

REMOVE ENGINE UNDER COVER SEAL

DRAIN ENGINE OIL

REMOVE REAR ENGINE UNDER COVER ASSEMBLY

REMOVE OIL FILTER SUB-ASSEMBLY

INSTALL OIL FILTER SUB-ASSEMBLY

ADD ENGINE OIL

INSPECT FOR ENGINE OIL LEAK

INSTALL REAR ENGINE UNDER COVER ASSEMBLY

INSTALL ENGINE UNDER COVER SEAL

МАСЛО И МАСЛЯНЫЙ ФИЛЬТР - ЗАМЕНА

  • ПРЕДОСТЕРЕЖЕНИЕ:
Prolonged and repeated contact with mineral oil will result in the loss of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.
Wear protective clothing and gloves. Avoid contact with used oil. If contact occurs, wash the area thoroughly with soap and waterless hand cleaner. Never use gasoline, thinners or solvents to wash the skin.
In order to protect the environment, dispose of used oil and used oil filters at designated disposal sites only.
1. REMOVE ENGINE UNDER COVER SEAL

Remove the 2 bolts and engine under cover seal.

2. DRAIN ENGINE OIL

Remove the oil filler cap.

Remove the oil drain plug and gasket, and then drain the oil into a container.

Clean the drain plug and install it with a new gasket.

  • Момент затяжки:
  • 35 N*m{ 352 kgf*cm, 25 ft.*lbf}
3. REMOVE REAR ENGINE UNDER COVER ASSEMBLY

Remove the 4 bolts and rear engine under cover.

4. REMOVE OIL FILTER SUB-ASSEMBLY
Масло И Масляный Фильтр - Замена. СИСТЕМА СМАЗКИ ДВИГАТЕЛЯ 5L-E. Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150

Using SST, remove the oil filter.

  • SST
  • 09228-44011
5. INSTALL OIL FILTER SUB-ASSEMBLY

Check and clean the oil filter installation surface.

Apply clean engine oil to the gasket of a new oil filter.

Install the oil filter and tighten it by hand until the gasket contacts the installation surface.

Using SST, tighten the oil filter. Choose from the following to further tighten the oil filter.

  • SST
  • 09228-44011

Масло И Масляный Фильтр - Замена. СИСТЕМА СМАЗКИ ДВИГАТЕЛЯ 5L-E. Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150

Using a torque wrench, tighten the oil filter.

  • Момент затяжки:
  • 17 N*m{ 173 kgf*cm, 13 ft.*lbf}

Tighten the oil filter a 3/4 turn by hand or with a common wrench.

Text in Illustration
Масло И Масляный Фильтр - Замена. СИСТЕМА СМАЗКИ ДВИГАТЕЛЯ 5L-E. Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ1503/4 turn
6. ADD ENGINE OIL

Add fresh engine oil.

  • Standard Engine Oil:
  • Oil GradeOil Viscosity (SAE)
    API CF-4 or CF10W-30
  • Standard Capacity:
  • ItemSpecified Condition
    Drain and refill without oil filter change6.0 liters (6.3 US qts, 5.3 Imp. qts)
    Drain and refill with oil filter change6.9 liters (7.3 US qts, 6.1 Imp. qts)
    Dry fill7.6 liters (8.0 US qts, 6.7 Imp. qts)

Install the oil filler cap.

7. INSPECT FOR ENGINE OIL LEAK

Start the engine. Make sure that there are no oil leaks from the areas that were worked on.

8. INSTALL REAR ENGINE UNDER COVER ASSEMBLY

Install the rear engine under cover with the 4 bolts.

  • Момент затяжки:
  • 29 N*m{ 296 kgf*cm, 21 ft.*lbf}
9. INSTALL ENGINE UNDER COVER SEAL

Install the engine under cover seal with the 2 bolts.

  • Момент затяжки:
  • 29 N*m{ 296 kgf*cm, 21 ft.*lbf}