Land Cruiser Prado GRJ150 TRJ150 TRJ155 KDJ150 TRJ155 LJ150 - МЕХАНИЧЕСКАЯ ЧАСТЬ ДВИГАТЕЛЯ 5L-E
INSPECT V BELT
ПРИВОДНОЙ РЕМЕНЬ - ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ
| 1. INSPECT V BELT |
Visually check the belt for cracks, oiliness or wear. Check that the belt does not touch the bottom of the pulley groove.
| *a | CORRECT |
| *b | INCORRECT |
| *c | Clearance |
If necessary, replace the belt.
Check the vane pump V belt deflection by pressing on the belt at the point indicated in the illustration with 98 N (10 kgf, 22 lbf) of force.
- Standard Deflection:
Item Specified Condition New belt 8 to 10 mm
(0.314 to 0.393 in.)Used belt 10 to 15 mm
(0.393 to 0.590 in.)
| *1 | Vane Pump Pulley |
| *2 | Crankshaft Pulley |
 | Measuring Point for Belt Tension |
Reference:
Using a belt tension gauge, check the cooler compressor V belt tension.
- Standard Tension:
Item Specified Condition New belt 441 to 539 N
(45 to 55 kgf, 99.1 to 121.2 lbf)Used belt 196 to 343 N
(20 to 35 kgf, 44.1 to 77.1 lbf)
- ПРИМЕЧАНИЕ:
Check the cooler compressor V belt deflection by pressing on the belt at the point indicated in the illustration with 98 N (10 kgf, 22 lbf) of force.
- Standard Drive Deflection:
Item Specified Condition New belt 11 to 15 mm
(0.433 to 0.590 in.)Used belt 15 to 20 mm
(0.590 to 0.787 in.)
| *1 | Cooler Compressor |
| *2 | Idle Pulley |
| *3 | Crankshaft Pulley |
| Measuring Point for Belt Tension |
Reference:
Using a belt tension gauge, check the cooler compressor V belt tension.
- Standard Tension:
Item Specified Condition New belt 372 to 608 N
(38 to 62 kgf, 83.6 to 136.7 lbf)Used belt 196 to 392 N
(20 to 40 kgf, 44.1 to 88.1 lbf)
- ПРИМЕЧАНИЕ:
Check the fan and generator V belt deflection by pressing on the belt at the point indicated in the illustration with 98 N (10 kgf, 22 lbf) of force.
- Standard Deflection:
Item Specified Condition New belt 7.0 to 10 mm
(0.276 to 0.393 in.)Used belt 10 to 14 mm
(0.393 to 0.551 in.)
| *1 | Water Pump Pulley |
| *2 | Generator |
| *3 | Crankshaft Pulley |
| Measuring Point for Belt Tension |
Reference:
Using a belt tension gauge, check the fan and generator V belt tension.
- Standard Tension:
Item Specified Condition New belt 441 to 539 N
(45 to 55 kgf, 99.1 to 121.2 lbf)Used belt 196 to 343 N
(20 to 35 kgf, 44.1 to 77.1 lbf)
- ПРИМЕЧАНИЕ: