Lexus IS250 IS220d GSE20 ALE20 - A960E AUTOMATIC TRANSMISSION
PARK / NEUTRAL POSITION SWITCH - REMOVAL
1. REMOVE NO. 2 ENGINE UNDER COVER |
2. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY |
Set the shift lever to the neutral position.
Remove the nut, and separate the floor shift gear shifting rod sub-assembly.
3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
Disconnect the park/neutral position switch connector.
Remove the nut and transmission control shaft lever RH.
Using a screwdriver, pry out the lock washer.
Remove the lock nut and lock washer.
Remove the bolt and park/neutral position switch.
LEXUS IS250, IS220d / GSE20 ALE20