INSTALL FRONT OIL PUMP OIL SEAL

FIX FRONT OIL PUMP BODY SUB-ASSEMBLY

INSTALL FRONT OIL PUMP DRIVEN GEAR

INSTALL FRONT OIL PUMP DRIVE GEAR

INSTALL FRONT OIL PUMP BODY O-RING

INSTALL STATOR SHAFT ASSEMBLY

INSTALL CLUTCH DRUM OIL SEAL RING

INSPECT OIL PUMP DRIVE GEAR ROTATION

INSTALL FRONT OIL PUMP BODY O-RING

Using SST and a hammer, install a new oil seal.

• SST
• 09350-30020(09351-32140)

• HINT:

• The oil seal end should be flush with the outer edge of the pump body.

Coat the oil seal lip with MP grease.

Place the oil pump body on the torque converter clutch.

Coat the driven gear with ATF.

Install the driven gear to the oil pump body.

Coat the drive gear with ATF.

Install the drive gear to the oil pump body.

Coat a new O-ring with ATF.

Install the O-ring to the oil pump body.

Align the stator shaft with each bolt hole.

Install the 14 hexagon bolts.

• Torque:
• 11 N*m{ 112 kgf*cm, 8 ft.*lbf}

Coat 3 new oil seal rings with ATF.

Squeeze the ends of the 3 oil seal rings so that the gap distance becomes 8 mm or less, and then install them to the stator shaft groove.

• NOTICE:

• Do not expand the ring ends excessively.

• HINT:

• After installing the oil seal rings, check that they rotate smoothly.

Make sure that the drive gear rotates smoothly.

Remove the oil pump assembly from the torque converter.

Coat a new O-ring with ATF.

Install the O-ring to the oil pump assembly.