INSPECT CLUTCH DISC ASSEMBLY

INSPECT FLYWHEEL SUB-ASSEMBLY

Using vernier calipers, measure the rivet head depth.

• Minimum rivet depth:
• 1.3 mm (0.0512 in.)

If the result is less than the minimum, replace the clutch disc assembly.

Install the clutch disc assembly to the transmission unit.

• NOTICE:

• Take care not to insert the clutch disc assembly in the wrong direction.

Using a dial indicator, check the clutch disc assembly runout.

• Maximum runout:
• 0.8 mm (0.031 in.)

If the runout exceeds the maximum, replace the clutch disc assembly.

Using a dial indicator, inspect the flywheel sub-assembly runout.

• Maximum runout:
• 0.1 mm (0.004 in.)

If the runout exceeds the maximum, replace the flywheel sub-assembly.