Lexus IS250 IS220d GSE20 ALE20 - CLUTCH

CLUTCH SYSTEM - BLEEDING

  • NOTICE:
  • Wash off clutch fluid immediately if it comes in contact with any painted surface.
  • HINT:
  • If any work is performed on the clutch system or if air in the clutch lines is suspected, bleed air from the brake system.
1. BLEED CLUTCH LINE
Clutch System - Bleeding. CLUTCH. Lexus IS250 IS220d GSE20 ALE20

Remove the bleeder plug cap.

Connect a vinyl tube to the bleeder plug.

Depress the clutch pedal several times, and then loosen the bleeder plug with the pedal depressed.

When fluid no longer comes out, tighten the bleeder plug, and then release the clutch pedal.

Repeat the previous 2 steps until all the air in the fluid is completely bled.

Tighten the bleeder plug.

  • Torque:
  • 11 N*m{ 112 kgf*cm, 8 ft.*lbf}

Install the bleeder plug cap.

Check that all the air has been bled from the clutch line.

2. INSPECT BRAKE FLUID LEVEL IN RESERVOIR
  • Fluid:
  • SAE J1703 or FMVSS No. 116 DOT3
LEXUS IS250, IS220d / GSE20 ALE20
CLUTCH
Lexus IS250 IS220d GSE20 ALE20
CLUTCH SYSTEM