INSTALL RELEASE CYLINDER BLEEDER PLUG

INSTALL RELEASE CYLINDER PISTON

Install the release cylinder bleeder plug to the cylinder body.

• Torque:
• 11 N*m{ 112 kgf*cm, 8 ft.*lbf}

Install the bleeder plug cap to the bleeder plug.

Install the spring to the cylinder body.

Apply lithium soap base glycol grease to the portions shown in the illustration.

Install the piston to the cylinder body.

• NOTICE:

• Be careful not to damage the inside of the cylinder body.

Install the push rod to the boot.

Install the boot (with push rod) to the cylinder body.