Lexus IS250 IS220d GSE20 ALE20 - SUSPENSION
REAR STABILIZER BAR - REMOVAL
| 1. REMOVE REAR WHEEL |
| 2. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR |
Remove the 2 nuts and the No. 2 differential support protector.
| 3. REMOVE REAR STABILIZER LINK ASSEMBLY LH |
Remove the nut, and separate the rear stabilizer link assembly LH from the rear stabilizer bar. (A)
- NOTICE:
- Be sure to hold the stud bolt using a hexagon wrench 6 in order to prevent the bolt from turning.
Remove the bolt, nut, and the stabilizer link assembly LH. (B)
| 4. REMOVE REAR STABILIZER LINK ASSEMBLY RH |
- HINT:
- Use the same procedures for the RH side and LH side.
| 5. REMOVE REAR STABILIZER BAR |
Remove the 4 bolts, 2 stabilizer brackets, 2 rear stabilizer bushing, and rear stabilizer bar.
LEXUS IS250, IS220d / GSE20 ALE20