REAR NO. 2 SUSPENSION ARM - REMOVAL

1. REMOVE REAR WHEEL

2. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR

Remove the 2 nuts and the No. 2 differential support protector.

3. REMOVE REAR SUSPENSION MEMBER BRACE

Remove the 2 bolts and rear suspension member brace.

4. REMOVE REAR NO. 2 SUSPENSION ARM

Remove the bolt and nut, and disconnect the rear stabilizer link assembly and the height control sensor link bracket.

Remove the bolt and nut, and disconnect the rear shock absorber with coil spring.

Remove the nut and bolt on the axle carrier side, and separate the rear No. 2 suspension arm.

Remove the bolt, nut, and washer on the rear suspension member side, and remove the rear No. 2 suspension arm.

LEXUS IS250, IS220d / GSE20 ALE20