MULTIPLEX TILT AND TELESCOPIC ECU - REMOVAL

1. REMOVE STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic)

Refer to the instructions for removal of the steering column assembly (for Power Tilt and Power Telescopic) .

2. REMOVE STEERING LOCK ACTUATOR ASSEMBLY

Using a center punch, mark the center of the 2 tapered-head bolts.

Using a 3 to 4 mm (0.12 to 0.16 in.) drill, drill a hole in the 2 bolts.

Using a screw extractor, remove the 2 bolts and steering lock actuator assembly from the steering column assembly.

3. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU

Disconnect the connector from the multiplex tilt and telescopic ECU.

Using a screwdriver, remove the 2 screws and multiplex tilt and telescopic ECU.

LEXUS IS250, IS220d / GSE20 ALE20