Lexus IS250 IS220d GSE20 ALE20 - STEERING COLUMN
ELECTRIC STEERING LOCK - INITIALIZATION
- HINT:
- In vehicles equipped with the push-button start function, the starting function may not be operational after recharging or while jump-starting a discharged battery. This condition is most common if battery voltage drops below 9 V. The following procedure has been developed to address this condition.
INITIALIZATION PROCEDURE |
Confirm that the D/C CUT fuse is installed.
- HINT:
- If the D/C CUT fuse is not installed, install it at this time.
Move the shift lever to the "P" position.
Turn the engine switch off.
Open the driver's door.
- HINT:
- Perform will start an initialization process between the steering lock ECU and the engine room J/B.
Depress the brake pedal.
Press the "START STOP" switch.
LEXUS IS250, IS220d / GSE20 ALE20