Theft Deterrent System (W/ Intrusion Sensor) - Horn Circuit
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
INSPECT HORN
THEFT DETERRENT SYSTEM (w/ Intrusion Sensor) - Horn Circuit
DESCRIPTION
When the theft deterrent system is switched from the armed state to the alarm sounding state, the main body ECU RH transmits a signal to cause the horn to sound at intervals of 0.4 seconds.
WIRING DIAGRAM

INSPECTION PROCEDURE
Inspect horn operation.
Press the horn switch and check if the horns sound.
- Result:
Result | Go to |
Horns sound | A |
Horns do not sound | B |
A | |
| |
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE |
|