PRECAUTION

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

REMOVE LOWER NO. 3 STEERING WHEEL COVER

REMOVE LOWER NO. 2 STEERING WHEEL COVER

REMOVE STEERING PAD

Using a screwdriver, remove the steering wheel No.3 cover lower.

• HINT:

• Tape up the screwdriver tip before use.

Using a screwdriver, remove the steering wheel No.2 cover lower.

• HINT:

• Tape up the screwdriver tip before use.

Using a "torx" socket wrench (T30), loosen the 2 "torx" screws until the groove along the screw circumference catches on the screw case.

Pull out the steering pad from the steering wheel assembly and support the steering pad with one hand as shown in the illustration.

• NOTICE:

• When removing the steering pad, do not pull the airbag wire harness.

Disconnect the horn connector.

Disconnect the 2 connectors from the steering pad.

• NOTICE:

• When handling the airbag connector, take care not to damage the airbag wire harness.

Remove the steering pad.