Lexus IS250 IS220d GSE20 ALE20 - SEAT BELT


SEAT BELT WARNING SYSTEM - HOW TO PROCEED WITH TROUBLESHOOTING

  • HINT:
Use these procedures to troubleshoot the seat belt warning system.
*: Use the intelligent tester.

1.VEHICLE BROUGHT TO WORKSHOP
NEXT
2.INSPECT BATTERY VOLTAGE
  • Standard voltage:
  • 11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT
3.CHECK COMMUNICATION FUNCTION OF MULTIPLEX COMMUNICATION SYSTEM (BEAN)*

Use the intelligent tester to check if the Multiplex Communication System (MPX) is functioning normally.

Result:
ResultProceed to
MPX DTC is not outputA
MPX DTC is outputB
B.
GO TO MULTIPLEX COMMUNICATION SYSTEM
A
4.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM (CAN)*

Use the intelligent tester to check if the CAN Communication System (CAN) is functioning normally.

Result:
ResultProceed to
CAN DTC is not outputA
CAN DTC is outputB
B.
GO TO CAN COMMUNICATION SYSTEM
A
5.PROBLEM SYMPTOMS TABLE
  • HINT:
NEXT
6.OVERALL ANALYSIS AND TROUBLESHOOTING*

DATA LIST / ACTIVE TEST

Terminals of ECU

On-vehicle Inspection

NEXT
7.REPAIR OR REPLACE
NEXT
8.CONFIRMATION TEST
NEXT
END
LEXUS IS250, IS220d / GSE20 ALE20
SEAT BELT
Lexus IS250 IS220d GSE20 ALE20
SEAT BELT WARNING SYSTEM