Lexus IS250 IS220d GSE20 ALE20 - SEAT BELT

REAR SEAT OUTER BELT ASSEMBLY - DISPOSAL

  • HINT:
  • When scrapping vehicles equipped with a seat belt pretensioner or disposing of a rear seat outer belt (with a seat belt pretensioner), always deploy the seat belt pretensioner first in accordance with the procedures described below. If any abnormality occurs during deployment of the seat belt pretensioner, contact the SERVICE DEPT. of the DISTRIBUTOR.
1. DISPOSE OF REAR SEAT OUTER BELT ASSEMBLY (WHEN INSTALLED IN VEHICLE)
  • CAUTION:
Never dispose of a rear seat outer belt assembly with a pretensioner that has not been deployed.
The seat belt pretensioner produces an exploding sound when it deploys, so perform the operation outdoors where it will not disturb local residents.
When deploying a rear seat outer belt (with a seat belt pretensioner), perform the operation at least 10 m (33 ft) away from the rear seat outer belt.
Use gloves and safety glasses when handling a rear seat belt with a deployed pretensioner.
Always wash your hands with water after completing the operation.
Do not apply water, etc. to a rear seat outer belt with a deployed pretensioner.
When deploying the seat belt pretensioner, always use the specified SST (SRS airbag deployment tool). Perform the operation in a place away from electrical interference.
Be sure to follow the procedures listed below when deploying the seat belt pretensioner.
Rear Seat Outer Belt Assembly - Disposal. SEAT BELT. Lexus IS250 IS220d GSE20 ALE20

Check the function of SST.

  • SST
  • 09082-00700
    09082-00770
  • CAUTION:
  • When deploying the seat belt pretensioner, always use the specified SST.

Rear Seat Outer Belt Assembly - Disposal. SEAT BELT. Lexus IS250 IS220d GSE20 ALE20

Connect the red clip of the SST to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.

  • HINT:
  • At this time, do not connect the yellow connector that will later be connected to the seat belt pretensioner.
Rear Seat Outer Belt Assembly - Disposal. SEAT BELT. Lexus IS250 IS220d GSE20 ALE20

Press the SST deployment switch, and check that the LED of the SST deployment switch lights up.

  • CAUTION:
  • If the LED is lit when the deployment switch is not pressed, the SST may be malfunctioning. Therefore, do not use the SST.
Rear Seat Outer Belt Assembly - Disposal. SEAT BELT. Lexus IS250 IS220d GSE20 ALE20

Connect SST.

Connect 2 SST, and then connect them to the rear seat outer belt pretensioner.

  • SST
  • 09082-00700
    09082-00770
  • NOTICE:
  • To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the pretensioner connector.
Rear Seat Outer Belt Assembly - Disposal. SEAT BELT. Lexus IS250 IS220d GSE20 ALE20

Move the SST at least 10 m (33 ft) away from the front of the vehicle.

Close all the doors and windows of the vehicle.

  • NOTICE:
  • Do not damage the SST wire harness.

Deploy the rear seat outer belt pretensioner.

Confirm that no one is inside the vehicle or within a 10 m (33 ft) radius of the vehicle.

Connect the red clip of the SST to the battery positive (+) terminal and the black clip to the negative (-) terminal.

Press the SST deployment switch and deploy the rear seat outer belt pretensioner.

  • HINT:
  • The seat belt pretensioner will deploy at the same time as the LED of the SST illuminates.
Rear Seat Outer Belt Assembly - Disposal. SEAT BELT. Lexus IS250 IS220d GSE20 ALE20

Dispose of the rear seat outer belt assembly.

Remove the rear seat outer belt assembly and SST.

Place the outer belt in a plastic bag, tie the end tightly and dispose of it in the same way as other general parts.

  • CAUTION:
The outer belt becomes very hot when the rear seat outer belt pretensioner is deployed, so leave it untouched for at least 30 minutes after it has been deployed.
Use gloves and safety glasses when handling an outer belt with a pretensioner that has been deployed.
Always wash your hands with water after completing the operation.
Do not apply water, etc. to a rear seat outer belt assembly with a pretensioner that has been deployed.
  • HINT:
  • When scrapping a vehicle, deploy the rear seat outer belt pretensioners, and then scrap the vehicle with the deployed outer belt installed.
2. DISPOSE OF REAR SEAT OUTER BELT ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)
  • NOTICE:
Never dispose of a rear seat outer belt assembly with a pretensioner that has not been deployed.
The seat belt pretensioner produces an exploding sound when it deploys, so perform the operation outdoors where it will not disturb local residents.
When deploying a rear seat outer belt (with a seat belt pretensioner), perform the operation at least 10 m (33 ft) away from the rear seat outer belt.
Use gloves and safety glasses when handling a rear seat belt with a deployed pretensioner.
Always wash your hands with water after completing the operation.
Do not apply water, etc. to a rear seat outer belt with a deployed pretensioner.
When disposing of a pretensioner equipped front seat outer belt, never deploy the belt in the customer's vehicle.
Be sure to follow the procedures listed below when deploying the seat belt pretensioner.
Rear Seat Outer Belt Assembly - Disposal. SEAT BELT. Lexus IS250 IS220d GSE20 ALE20

Check the function of SST.

  • SST
  • 09082-00700
    09082-00770
  • CAUTION:
  • When deploying the seat belt pretensioner, always use the specified SST.

Rear Seat Outer Belt Assembly - Disposal. SEAT BELT. Lexus IS250 IS220d GSE20 ALE20

Connect the red clip of the SST to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.

  • HINT:
  • At this time, do not connect the yellow connector that will later be connected to the seat belt pretensioner.
Rear Seat Outer Belt Assembly - Disposal. SEAT BELT. Lexus IS250 IS220d GSE20 ALE20

Press the SST deployment switch, and check that the LED of the SST deployment switch lights up.

  • CAUTION:
  • If the LED is lit when the deployment switch is not pressed, the SST may be malfunctioning. Therefore, do not use the SST.

Connect SST.

Rear Seat Outer Belt Assembly - Disposal. SEAT BELT. Lexus IS250 IS220d GSE20 ALE20

Connect 2 SST, and then connect them to the rear seat outer belt pretensioner.

  • SST
  • 09082-00700
    09082-00770
  • NOTICE:
  • To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the pretensioner connector.
Rear Seat Outer Belt Assembly - Disposal. SEAT BELT. Lexus IS250 IS220d GSE20 ALE20

Place the outer belt on the ground and cover it with a tire and wheel assembly.

  • NOTICE:
  • Position the rear seat outer belt assembly as shown in the illustration.

Position and hold the SST at least 10 m (33 ft) away from the wheel.

  • NOTICE:
  • Do not damage the SST wire harness.
Rear Seat Outer Belt Assembly - Disposal. SEAT BELT. Lexus IS250 IS220d GSE20 ALE20

Deploy the rear seat outer belt pretensioner.

Check that no one is within a 10 m (33 ft) radius of the wheel.

Connect the red clip of the SST to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.

Press the SST deployment switch and deploy the rear seat outer belt pretensioner.

  • HINT:
  • The seat belt pretensioner will deploy at the same time as the LED of the SST illuminates.
Rear Seat Outer Belt Assembly - Disposal. SEAT BELT. Lexus IS250 IS220d GSE20 ALE20

Dispose of the rear seat outer belt assembly.

Remove the wheel and SST.

Place the outer belt in a plastic bag, tie the end tightly and dispose of it in the same way as other general parts.

  • CAUTION:
The outer belt becomes very hot when the rear seat outer belt pretensioner is deployed, so leave it untouched for at least 30 minutes after it has been deployed.
Use gloves and safety glasses when handling an outer belt with a pretensioner that has been deployed.
Always wash your hands with water after completing the operation.
Do not apply water, etc. to a rear seat outer belt assembly with a pretensioner that has been deployed.
  • HINT:
  • When scrapping a vehicle, deploy the rear seat outer belt pretensioners, and then scrap the vehicle with the deployed outer belt installed.
LEXUS IS250, IS220d / GSE20 ALE20
SEAT BELT
Lexus IS250 IS220d GSE20 ALE20
REAR SEAT OUTER BELT ASSEMBLY