Lexus IS250 IS220d GSE20 ALE20 - PRE-CRASH SAFETY
PRE-CRASH SAFETY SYSTEM - PRECAUTION
- NOTICE:
- When disconnecting the negative (-) battery cable, initialize the following systems after the cable is reconnected.
| System Name | See Procedure |
| Parking Assist Monitor System | |
| Power Window Control System |
| 1.TROUBLESHOOTING PRECAUTIONS |
If a terminal contact point malfunction or part installation problem occurs, removal and reinstallation of the suspected part may return the system to normal. However, be aware that the normal condition may only be temporary.
Before disconnecting connectors or removing/installing parts, determine the malfunctioning area by checking and writing down the vehicle's condition at the time of the malfunction (DTC outputs, etc.).
Be sure to check for DTCs related to other systems. The pre-crash safety system may be influenced by malfunctions in other systems.
| 2.HANDLING PRECAUTIONS |
When removing and installing the ECU, sensor, switch or other pre-crash safety system related parts, perform the following:
Make sure the engine switch is OFF unless otherwise specified in the inspection procedures.
After the removal/installation, check for DTCs and confirm that a normal system code is output.
LEXUS IS250, IS220d / GSE20 ALE20