Lexus IS250 IS220d GSE20 ALE20 - PRE-CRASH SAFETY
PRE-CRASH SAFETY SYSTEM - DATA LIST / ACTIVE TEST
| DATA LIST |
- HINT:
- Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful as intermittent conditions or signals may be discovered before parts or wiring are disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
By following the display on the tester, select the "Data List".
| Item | Measurement Item/ Range (Display) | Normal Condition | Diagnostic Note |
| D Bk SW | Buckle switch status of driver's seat / UNSET: Unfasten driver side seat belt SET: Fasten driver side seat belt NG: Indeterminate data | UNSET / SET | - |
| P Bk SW | Buckle switch status of passenger's seat / UNSET: Unfasten passenger side seat belt SET: Fasten passenger side seat belt NG: Indeterminate data | UNSET / SET | - |
| D Belt Ctrl | Seat belt control status of driver's seat / STOP: Control stopped ON: Controlled ERROR: Indeterminate data | STOP / ON | Seat belt (driver side) is fastened |
| P Belt Ctrl | Seat belt control status of passenger's seat / STOP: Control stopped ON: Controlled ERROR: Indeterminate data | STOP / ON | Seat belt (passenger side) is fastened |
| #Present Codes | Number of present trouble codes / min: 0, max: 255 | Number of DTCs will be displayed | - |
| #Past Codes | Number of past trouble codes / min: 0, max: 255 | Number of DTCs will be displayed | - |
| ACTIVE TEST |
- HINT:
- Using the intelligent tester to perform Active Test allows the operation or effects of relays, VSVs, actuators and other items to be tested without removing any parts. This non-intrusive inspection can be very useful as intermittent conditions or operation may be discovered before parts or wiring are disturbed. Using the Active Test early in troubleshooting is one way to save diagnostic time. It is possible to view Data List information on the intelligent tester while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Following the display on the tester, select the "Active Test".
| Item | Vehicle Condition / Test Details | Diagnostic Note |
| D Belt Mtr | Driver's seat belt motor / ON: Seat belt motor operates OFF: Seat belt motor does not operate | Seat belt (driver side) is fastened |
| P Belt Mtr | Passenger's seat belt motor / ON: Seat belt motor operates OFF: Seat belt motor does not operate | Seat belt (passenger side) is fastened |
| D-P Blt Mtr | Driver's and passenger's seat belt motor / ON: Seat belt motors operate OFF: Seat belt motors do not operate | Seat belts (driver and passenger) are fastened |
- NOTICE:
The belt motor that is not equipped with buckle switch is not operated.
To prevent the belt motor from heating up, this test can not be activated continuously. Operate with 30 seconds interval.
LEXUS IS250, IS220d / GSE20 ALE20